Harnesses

TF4000 - Miller Titan Stretchable Harnesses.

T-Flex Stretchable Harnesses, Fully adjustable design, Sub-pelvic strap, One universal size fits most, Non-slip mating buckle chest strap.

Harnesses

AB17510 - DBI/Sala 3-Point Harness.

3-Point Lanyard with attached 6' AE57610 lanyard.

1 dorsal D-Ring, Pass-thru buckle leg and chest closures, Supple back plaque, Universal sizing, 1.75" wide polyester web-blue top and yellow bottom, minimum tensile strength > 5000 lbs., Zinc plated stamped steel, Net Weight 1.71 lbs., Meets or exceeds OSHA, 1927 & ANSI Z359 performance criteria.

Harnesses

1101655 - DBI/Sala DELTA II Construction Harness.

Delta No-Tangle™ design for added comfort and easy donning, Spring loaded stand-up back D-ring ensures fast, easy, and safe connections, Tongue buckle body belt and side D-rings for added comfort, support and versatility, Sewn-in back pad and shoulder pads for the ultimate in comfort, Adjustable non-slip chest strap with easy to use pass-thru buckle, Parachute buckles on lower shoulder straps for quick and easy adjustment, Tongue buckle leg straps for fast & easy donning, Polyester webbing construction for added durability, Plated hardware for corrosion resistance, Size = Large (XS - XL available), Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.

Harnesses

1102000 - DBI/Sala DELTA II Standard Harness.

Delta No-Tangle™ design for added comfort and easy donning, Spring loaded stand-up back D-ring ensures fast, easy, and safe connections, Adjustable non-slip chest strap with easy to use pass-thru buckle, Parachute buckles on lower shoulder straps for quick and easy adjustment, Tongue buckle leg straps for fast & easy donning, Polyester webbing construction for added durability, Plated hardware for corrosion resistance, Universal sized, Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.

Harnesses

1105475 - DBI/Sala DELTA II Nomex/Kevlar Harness.

Delta No-Tangle™ design for added comfort and easy donning, Nomex®/Kevlar® webbing for flame, heat and cut resistance, Back D-ring, Incorporates built-in belt loops; use your own or try one of ours for added back support and tool carrying options, Adjustable non-slip chest strap with easy to use pass-thru buckle, Pass-thru buckle leg straps for fast & easy donning, Non-conductive, non-sparking PVC coated hardware, Universal sized, Meets or exceeds all applicable industry standards including OSHA and ANSI.

Harnesses

AB10113 - PROTECTA PRO Standard Harness.

PRO harnesses have a ergonomically designed chassis for better fit and function ,Back D-ring , Pass thru leg straps for quick and easy donning, Built in impact indicators for easy inspection, Lightweight hardware and connecting components reduce weight, Spring loaded torso buckles for quick and easy adjustment , Polyester web for superior abrasion resistance and durability, Medium/Large sizing fits most; Small and Extra-Large sizes available.

Harnesses

AB140131 - PROTECTA PRO Construction Harness.

PRO harnesses have a ergonomically designed chassis for better fit and function, Back D-ring, Tongue buckle leg straps for fast and easy donning, Integrated Hip pad and shoulder pads for the ultimate in comfort, Tongue buckle body belt and side d-rings for added comfort and support when positioning. Integral lanyard keeper to keep your connector up and away. Built in impact indicators for easy inspection, Lightweight hardware and connecting components reduce weight , Spring loaded torso buckles for quick and easy adjustment , Polyester web for superior abrasion resistance and durability. Medium/Large sizing fits most; Small and Extra-Large sizes available. Meeting globally accepted standards including ANSI, OSHA, CSA and soon CE.

Harnesses

AB21013 - PROTECTA PRO Harness with Comfort Padding.

PRO Harnesses with Comfort Padding have an ergonomically designed chassis for better fit and function, Lightweight padding enhances comfort making this a true all-day harness, All are equipped with firm, lightweight comfort pads around the back D-ring and shoulders and leg straps, Back D-ring, Quick Connect chest & leg straps for quick and easy donning, Built in impact indicators for easy inspection, Lightweight hardware and connecting components reduce weight , Spring loaded torso buckles for quick and easy adjustment, Polyester web for superior abrasion resistance and durability, Medium/Large sizing fits most; Small and Extra-Large sizes available, Meeting globally accepted standards including ANSI, OSHA, CSA and soon CE.

 

Lanyards

AE57610 - DBI/Sala Shock-Absorbing Single Lanyard.

6' Single Leg shock absorbing lanyard with standard snaphooks at each end.

Web: 1.75" polyester, Minimum tensil strength > 5,000 lbs, Hooks (AJ523A) Zinc plated stamped steel, Net Weight 2.4 lbs, Meets or exceeds OSHA 1926 & ANSI Z359.

Lanyards

AE57630 - DBI/Sala Shock-Absorbing Double Lanyard.

6' Double Leg shock absorbing lanyard with standard snaphooks at each end.

Web: 1.75" polyester, Minimum tensil strength > 5,000 lbs, Hooks (AJ523A) Zinc plated stamped steel, Net Weight 2.4 lbs, Meets or exceeds OSHA 1926 & ANSI Z359.

Lanyards

1224306 - DBI/Sala Shockwave 2 Shock-Absorbing Single Lanyard.

Expands to 6 ft. and contracts to 4-1/2 ft. in reaction to your movements. Reduces trip fall hazards, dragging and snagging for complete freedom of movement. Easy to use self locking snap hooks at both ends. Abrasion resistant tubular webbing for durability and longevity. Impact indicator allows user to visually inspect unit for a fall. 6 ft. in length. Limits arresting forces to 900 lbs. or less. Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.

Lanyards

1224409 - DBI/Sala Shockwave 2 Shock-Absorbing Double Lanyard.

Expands to 6 ft. and contracts to 4-1/2 ft. in reaction to your movements. Reduces trip fall hazards, dragging and snagging for complete freedom of movement. Twin-leg 100% tie-off style helps you remain connected at all times. Easy to use self locking snap hooks at center and aluminum hooks (2-1/4" opening) at the leg ends. Abrasion resistant tubular webbing for durability and longevity. Impact indicator allows user to visually inspect unit for a fall. 6 ft. in length. Limits arresting forces to 900 lbs. or less. Meets or exceeds all applicable industry standards including OSHA, ANSI.

Lanyards

1221906 - DBI/Sala WrapBax 2 Tie-Back Shock-Absorbing Single Lanyard.

The WrapBax 2 is specifically designed for tie-back use - eliminates the need for a separate anchorage connector, reduces inventory & cost, simplifies inspections & worker training & improves compliance. Single-leg lanyard with WrapBax 2 hook at one end snap hook at the other end, 6 ft. in length. 5,000 lb. hook capacity from every direction including the gate. Heavy-duty webbing provides five times more abrasion resistance, making it ideal for tying off on rough surfaces. Built-in web guide directs the webbing into the open hook for simple and quick connection and use.Limits arresting forces to 900 lbs. or less. Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.

Lanyards

1222003 - DBI/Sala WrapBax 2 Tie-Back Shock-Absorbing Double Lanyard.

The WrapBax™2 is specifically designed for tie-back use - eliminates the need for a separate anchorage connector, reduces inventory & cost, simplifies inspections & worker training & improves compliance. Twin leg 100% Tie-off lanyard with WrapBax™2 hook at leg ends and snap hook at the pack end, 6 ft. in length. 5,000 lb. hook capacity from every direction including the gate. Heavy-duty webbing provides five times more abrasion resistance, making it ideal for tying off on rough surfaces. One-handed operation via an industry preferred easy-to-use hook action found standard on all DBI patented snap hooks. Pinch-less design allows you to open and connect the hook without thumbs or fingers getting in the way - no pinching of fingers even while wearing gloves. Built-in web guide directs the webbing into the open hook for simple and quick connection and use. Unique hook design makes it easily differentiated from standard snap hooks to eliminate confusion on the jobsite for added safety. Limits arresting forces to 900 lbs. or less . Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.

Lanyards

AE542AW1 - PROTECTA Shock Absorbing Single Lanyard.

Web Lanyard-2 Snaphooks. Conforms to CSA Standards. Includes two AJ520A double locking snaphooks. Shock absorber unit encased in UV-Resistant transparent plastic for easy inspection. 100% back-up strap (in shock absorber unit) minimizes impact load. Keeps impact forces to below 900 lbs. Complies with OSHA 1926 and ANSI Z359 standards for deceleration devices.

Lanyards

AE560A6 - PROTECTA Shock Absorbing Single Lanyard.

Pro-Stop Lanyard AE560A Series Conforms to CSA Standards. 7/8" polyester web with a 1-3/8" tubular nylon jacket. Includes 2 AJ520A double-locking snaphooks. Available in  4’, and 6' lengths. Maximum load - 310 lbs. Keeps impact forces to below 900 lbs. Complies with OSHA 1926 & ANSI A10.14-1991 standards.

Lanyards

AE57610 - PROTECTA First Shock Absorbing Single Lanyard.

FIRST 6' Single Leg Shock Absorbing Lanyard. Conforms to CSA Standards. Web : 1.75" polyester. Minimum tensile strength >5,000 lbs. Hooks : AJ523A Zinc plated stamped steel. Net Weight 2.4 lbs. Meets or exceeds OSHA 1926 & ANSI Z359 performance criteria.

Lanyards

AB21013 - PROTECTA First Shock Absorbing Double Lanyard.

FIRST 6' Conforms to CSA Standards. Web : 1.75" polyester. Minimum tensile strength >5,000 lbs. Hooks : AJ523A - Zinc plated stamped steel. AJ595A - Forged steel. Net Weight 3.74 lbs. Meets or exceeds OSHA 1926 & ANSI Z359 performance criteria.

Anchorages & Anchorage Connectors

2104700 - DBI/Sala Glyder2 Slicing Beam Anchor.

Provides complete horizontal mobility, tie-off overhead or at your feet (use with Force2 shock absorbing lanyard when used at your feet). Anchor effortlessly slides across the beam on its wear pads, eliminating metal-to-metal contact. Integrated ratcheting adjustment system provides quick and easy installation and removal. Unique guarded locking mechanism protects the anchor from accidental disengagement. Dual beam grip adjustment prevents twisting and turning as it moves along the beam. Extremely lightweight at only 3.7 lbs (1.66 kg), with a user capacity of 420 lbs. (189 kg) and a minimum breaking strength of 5,000 lbs (22kn). Replaceable synthetic wear pads . Fits flange 3-1/2" to 14" wide and up to 1-1/4" thick. Meets or exceeds all applicable industry standards including OSHA, ANSI A10.32, Z359.1 and EN795.

Anchorages & Anchorage Connectors

2103143 - DBI/Sala Man Rated I-Beam Trolley.

Trolley for use with self retracting lifelines on horizontal beams. Attachable anywhere along beam including midpoint. Trolley Guards protect the wheels from damage and keeps beam clear of debris. Fits 3" to 8" flange width thickness up to 11/16". Dual adjustment dials are fixed to trolley for precise alignment in 1/8" increments. Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.

Anchorages & Anchorage Connectors

AJ450A - PROTECTA Web Sling.

5,000 lb. anchorage point . Easy to install. Accommodates a wide variety of different size structures. 3" scuff/cut guard provides extended life. 6' standard length available-Part # AJ450A6. Custom lengths available. Lightweight. Meets OSHA 1926 & ANSI Z359 standards.

 

Anchorages & Anchorage Connectors

AJ408AG - PROTECTA Cable Sling.

Easy to install and use. Galvanized steel construction-available in stainless steel-Part # AJ408AS. Lightweight. Versatile, fits a variety of anchorage points. 3 diameter anchorage ring easily accommodates various snaphooks and carabiners. Coating protects anchor point and wire rope. 5,400 lb. rated anchorage point. Custom lengths available-contact Protecta. Meets OSHA 1926 & ANSI Z359 standards.