Gas Monitoring

1810-0050 - INDUSTRIAL SCIENTIFIC GasBadge® Plus Personal Single Gas Monitor.

Low cost CO, H2S, O2, NO2, or SO2 monitoring, 2 Year continuous monitoring, PPM or % by volume readout, User adjustable alarm and calibration gas set points, extremely water resistant.

Gas Monitoring

1810-4034 - INDUSTRIAL SCIENTIFIC VX500 Photolonization Detector.

Ideal for VOC detection, Internal pump for remote sample draws up to 100 feet, User programmable list of 5 "favorite" factors, Datalogging, Field replaceable 10.6 eV ionization lamp.


Gas Monitoring

INDUSTRIAL SCIENTIFIC MX6 iBrid™ Multi-Gas Monitor.

Full Color Display, 1 to 6 multi gas monitor, User-friendly menu driven navigation, 25 sensor options, diffusion mode or aspirated, Docking Station™ Ready, PID and infrared sensors available. Available sensors: CO, SO2, PH3, NO, CO2, H22S, NH3, HCl, ETO, PID, O2, Cl2, HCN, LEL, NO2, Cl02, H2, CH4. Contact Us for Configuration.

Gas Monitoring

1810-4307- INDUSTRIAL SCIENTIFIC iTX Multi-Gas Monitor.

Monitors from one to six gases, wide range of field-replaceable sensors, datalogging capability standard, dot-matrix display with black lighting, 50 ppm resolution for hydrocarbons, LEL, CH4 over-range protection, 24 hour run time with Lithium-ion battery. LEL, CH4, CO, H2S, O2, SO2, NO2, CL2, NO, ClO2, NH3, H2, HCl, PH3, HCN.


Gas Monitoring

1810-5437 - INDUSTRIAL SCIENTIFIC M40 Multi-Gas Monitor.

Monitors from one to four gases, for O2, LEL, CO, H2S, standard vibrating, 90 dB audible and ultrabright visual alarms, 18-hour run time with integral Li-Ion battery pack, two-year all inclusive warranty.


Gas Monitoring

INDUSTRIAL SCIENTIFIC iTrans™ Single or Dual Gas Monitor.

Low cost fixed-point monitors with choice of sensors options, Unique dual sensor, platform (on-board & remote placement), 4-20 mA and ModBus RTU interface for direct communication to any control device or PLC, Highly visible, split-screen LED display, Non-intrusive calibration using magnetic switches, explosion-proof aluminum housing or 316 stainless steel housing. CO, CO-H2, NO, NH3, H2S, SO2, NO2, Cl2, ClO2, HCN, O2, HCl, PH3, H2, LEL.

Gas Monitoring

8318910 - DRAEGER X-am 2000 Multi Gas Monitor.

X-am 2000 EX, O2, CO, H2S w/ alkaline battery pack. The Dräger X-am 2000 is the new generation of gas measurement instruments, which is adjusted to the requirements for personal monitoring. With an integrated rubber boot, gas access from two sides, which prevents the sensors of being covered, and dust and water density according to IP 67 the Dräger X-am 2000 offers much more reliability. The new minimized, high-performance Dräger XXS-sensors have fast response times and give the possibility of performing a bump test in only 10 seconds.


Gas Monitoring

4543721 - DRAEGER X-am 3000 Confined Space Kit Multi Gas Monitor.

Dräger X-am 3000 is an innovative 3- or 4 gas warning-device. This small and lightweight instrument reliably monitors H2S, CO, O2 and combustible gases and vapors in ambient air. A large display enables the easy identification of the measured values. The simple 3-button operation and an easy to use menu ensure intuitive operation. An optional internal pump with a 10 m (33 ft.) tubing is ideal for confined space applications. A convenient pump adaptor makes is easy to switch between pump and diffusion modes.

Gas Monitoring

4552199 - DRAEGER X-am 7000 Multi Gas Monitor.

Dräger X-am 7000 is the innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The Dräger X-am 7000 can be equipped with three electrochemical, and two catalytic bead or infrared sensors. A new, flexible goose-neck probe simplifies the search for leaks at e.g. flanges, shut-off devices and valves. In the tracking-mode, the instrument generates an increasing or decreasing rate of beeps, depending on the gas concentration detected.


Gas Monitoring

4530402 - DRAEGER Pac EX 2 Combustible Gas and Oxygen Monitor.

With a compact, handy and pocket-sized design, this robust instrument can be used for all personal monitoring applications. Pac Ex 2 measures for explosive hazards and a lack or surplus of oxygen. Combined with a vibrating alarm, an acoustic and optic alarm react instantly when the gas concentration exceeds the set alarm thresholds. The modular design enables high instrument flexibility.

Gas Monitoring

4543840 - DRAEGER Pac 3000 Personal Monitor.

Personal monitoring in work places with Dräger Pac 3000, the innovative single gas instrument, ensures reliable monitoring of ambient air and fast warnings against harmful concentrations of carbon monoxide, hydrogen sulphide or oxygen. By using the status display and without replacing the sensor, the Dräger Pac 3000 can be used maintenance-free for over two years.


Gas Monitoring

4530010 - DRAEGER Pac III Gas Monitor.

Pac III is a family of single gas measuring units with three different versions to adapt to the most diverse measurements tasks and application conditions: Pac III B can be used to measure CO, H2S or O2; Pac III S accepts 20 different sensor types and Pac III E has an optional datalogger and special alarm evaluation for TRGS / ACGIH. Pac III is also equipped with a wide range or power supplies and meets many of the current approvals.

Gas Monitoring

4055711 - DRAEGER CMS Emergency Response Kit.

The CMS Emergency Response Kit contains the Dräger CMS Analyzer, the appropriate accessories, and a selection of 10 different Chips for response to Haz-Mat or other situations. All chips use the exact same procedure. The Chips never need calibration, and the Analyzer does not require battery charging. All of the needed accessories are placed in one rugged carrying case, ready to go at a moments notice.


Gas Monitoring

4053473 - DRAEGER Accuro Pump Soft Side Kit.

Accuro Pump is constructed of non-metallic, corrosion resistant materials. It can't be bent by rough treatment and it withstands harsh chemical environments. Soft Side Kit includes Accuro Pump, deluxe tube opener, spare parts kit, rubber caps (10 pk), allen wrench, nylon transport case. Tubes are sold separately.

Gas Monitoring

DRAEGER Tubes® Short - Term Measurements.

For short-term measurements more than 160 Dräger Tubes are available to measure the so-called spot concentrations of specific gases. A wide range of different gasses and vapors can be detected and measured, e.g. Determining and measuring concentration peaks, measuring personal exposure, in the inhalation area, detecting leaks in pipelines, gas installations, etc. and air analysis in sewers, shafts, and confined spaces. Contact Us for Ordering Info.


 

Dust Monitoring

182000K1 - CASELLA Apex Personal Sampling Pump.

Apex standard pump including charger. The new Apex range of personal sampling pumps has been developed to provide sampling capabilities between 0.005 and 5 l/min. They are suitable for a wide range of applications and offer many advanced features not found in comparable products. Direct volumetric flow control. Multi0lingual displays. Emergency dry cell battery backup option. Digital circuitry ensures precise and constant control of the flow rate.

Dust Monitoring

182063K1 - CASELLA Apex Pro Personal Sampling Pump.

Apex Pro pump including charger. The enhanced Apex Pro is a fully programmable, enhanced version of the Apex Personal air sampling pump. Wide operating range from 0.8 to true 5 l/min. 5 to 800 ml/min low range available with low flow adaptor. Long term stability between calibrations. Whenever the pump is started and stopped data logging is enabled. This data is increasingly being demanded for auditing and legislative purposes.

Dust Monitoring

182170B - CASELLA Apex Lite Personal Sampling Pump.

The Apex Lite is a new variant of the Apex standard personal air sampling unit. It operates from dry cells rather than relying on internal rechargeable battery packs. It can be rapidly deployed and is ideal for emergency surveys or on site as a stand by unit. The Apex Lite is ideally suited to occasional or emergency standby sampling applications. Longer run times may be achieved due to the higher capacities offered from some Alkaline cells.

Dust Monitoring

176000A - CASELLA Microdust Pro Real Time Dust Monitor.

The Microdust Pro is a portable, real time monitor for assessing the concentration of suspended particulate matter. It is the only handheld real-time dust monitor on the market capable of graphically presenting variations in dust concentration on a real time scrolling graph. 4 fixed ranges or auto ranging scale. Can be recalibrated for up to 4 separate dust types selectable by user. Data logging memory with storage for up to 32 separate runs.

 

Noise Monitoring

CEL-231 - CASELLA CEL-200 Series Sound Level Meter.

Digital sound level meter for simple noise checks in the workplace and general outdoor nuisance noise measurement. Ideal for the measurement of steady or non-transient noise sources. These include such sources as fan, pumps, compressors, heating and ventilation systems or machinery that runs at constant speed. A large, easy to read digital display indicates the noise level with a resolution of 0.1 dB over a wide range of noise levels. Lightweight and slim design fits in the pocket. Slow and fast responses available.

Noise Monitoring

CEL-350 - CASELLA CEL-350 System dBadge Dosimeter.

Fully featured and able to satisfy all current noise at work measurement protocols during a single run the CEL-350 will be an ideal instrument for experience and new user of dosimeters in the workplace. Lightweight less than 2.4 oz. Quick battery recharge in less than 90 mins from completely empty. Wide dynamic range from 65 to a full 140 dB. Measures simultaneously 3 dB and 5 dB exchange rates. Stores everything for later review.

Noise Monitoring

CEL-450 - CASELLA CEL-400 Series Real Time Analyzer.

The CEL-450 is a new concept in sound level meters offering the power of digital signal processing (DSP) technology in a small lightweight unit. The instrument provides all the features of a broadband meter while simultaneously offering the ability to measure noise levels in whole or third octave bands across a wide range of frequencies that cover the whole audible range. Single 140dB ultra-wide dynamic range. Real time measurements in octave from 16 Hz to 16kHz. Max, min, average, peak measurements.

Heat Monitoring

180000A - CASELLA Microtherm WBGT Heat Stress  Monitor.

Workplace heat exposure testing, Tracks Wet Bulb Globe Temperature (WBGT), Real Time display of changing levels. Large dot matrix graphical screen. Numeric display of temperatures on screen. Measures air temp, globe temp and wet bulb temp. Auto ranging y axis on screen. 4 selectable time bases on screen. Shows calculated value of the WBGT index. Features three high stability thermometers. Worldwide charger and power supply unit with adaptors for 120 and 220 Vac. Comes complete with Win HSM software.

Weather Monitoring

NOMAD - CASELLA Nomad Portable Weather Monitor.

Sensus data logger, Fully self contained weather monitoring system with 7 standard sensors. Meteorological parametes typically collected, A wide range of high quality sensors are provided to obtain the required information in the Casella weather monitoring systems. These include: wind speed using an anemometer, wind direction using a wind vane, ambient air temperature using a precision thermometer, ambient air pressure, relative humidity, sunshine hours using a solarimeter, rainfall using a tipping bucket rain gauge.