Face Shields

MSA Universal Foldback Faceshield Frames.

Designed to fit any of MSA's protective caps or hats. When properly positioned, they will securely hold faceshields, visors and welding shields. A durable ring of rubber tubing holds the plastic adapters securely on the cap or hat while a metal spring holds the metal brackets in place. The plastic adapters are non-conducting, and can be worn on dielectric caps or hats without affecting the headwear's dielectric qualifications.

Face Shields

MSA Defender® + Faceshield Frames.

Available in plastic and metal, cap and hat models and can be used with slotted or non-slotted helmets. WARNING: Do not use metal foldback faceshield frame in electrical applications. Failure to follow this warning can result in serious injury or death.

Face Shields

MSA Visors Gold-coated polycarbonate, with 4" gradient-tinted strip.

Faceshields and visors should always be worn with primary eye protection such as impact-resistant spectacles or goggles. Visors should be inspected frequently and replaced immediately if worn, scratched or damaged in any way. Selection of proper models for specific hazards and communication of all instructions, precautions and limitations to the wearer is the responsibility of user safety specialists, who are also responsible to see they are strictly observed. Failure to comply with any of the above could result in serious injury or death. All MSA visors meet or exceed applicable requirements of ANSI Z87.1-2003. MSA visors are manufactured for use on only MSA frames and assemblies for compliance with ANSI Z87.1 2003.

Face Shields

AMA10179 - Allsafe MonoShield w/ Goggle, Clear Lens.

Durable MonoShield clips directly onto MonoGoggle to provide distortion-free vision with optimum splash and impact protection. Low profile shield design allows freedom of movement. Indented sides and bottom provide extra splash resistance. Shield extends below the chin for additional protection. May be worn with a safety cap and most disposable respirators. MonoGoggle, with FogGard Plus coating provides fog-free vision and is ideal for high humidity environments. Soft, contoured nosepiece forms a secure seal around the nose and cheeks. Ideal for cleanrooms, mines, foundries, public utilities, construction and metal processing. Complies with ANSI Z87.1 and CSA Z94.3 Standards.

 

Safety Goggles

UVXS3960C - Uvex Stealth Clear Safety Goggles.

Futuristic, low profile design for chemical splash and impact. Toric lens provides superior optics and peripheral vision. Rx insert available. Unsurpassed comfort. Easiest lens replacement system available. Uvextreme® anti-fog coating and indirect ventilation system minimizes fogging. Features Uvex Dura-streme™ coating technology. Anti-fog lenses last up to 3x longer. Quick adjust headband. Lens tints: Clear, Amber or Gray. Body available in Gray, Teal or Orange.

Safety Goggles

UVXS1890X - Uvex Fury Clear Safety Goggles.

Sleek, frameless design with wrap around 9-base unilens.

Ideal for dust and small particulates. Soft, flame resistant, replaceable face foam and headband. Not for chemical splashes. Meets ANSI Z87+ and CSA Z94.3 safety standards.

Safety Goggles

WILL11250800 - Willson V-Maxx Clear Safety Goggles.

Sleek wrap-around styling. 180° clear field of vision. Pivoting headband clips to adjust strap around hardhats or hearing protection. OTG compatible (can be worn over most prescription eyewear). Direct and indirect ventilation styles available for impact or splash applications. Lenses coated with Willson® Fog-Ban® anti-fog coating. Adjustable elastic or neoprene headband. Peel-off goggle covers available to extend useful life of the lens. Meets ANSI Z87+ and CSA Z94.3 safety standards.

Safety Goggles

XP-800 - Orr Safety Low Profile Clear Antifog Lens Safety Goggles.

The XP 800 Safety Goggles have a unique low-profile design for maximum comfort and protection. They are crafted from high-grade nylon material, and have an ultra light flexible frame for comfort fit. It is equipped with surgical grade closed foam for high particle count conditions. High quality elastic headband. Clear lens. Anti-fog treated. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available with Gray Antifog Lens or Indoor/Outdoor Antifog Lens.

Safety Goggles

ENC06068004 - Encon Clear Safety Goggles.

Secure Seal. Supple and Ergonomically Designed. Indirect Ventilation System Reduces Heat and Protects from Chemical Splash. Fits Over Large Prescription Eyewear and Sideshields. Maximun Protection Against Chemical Splashes. 99.9% UVA and UVB Protection To 385Nm. SEI Certified - ANSI Z87.1-2003 (High Impact Certified) and CSA Z94.3-2007.

Safety Goggles

CLV2235R - Crews Chemical Splash Anti-Fog Safety Goggles.

Chemical splash. Interchageable lenses available. Provides 99.9% UV protection. ANSI Z87.1, AS/NZS, CSA Certified. Lens Color: Clear anti-fog.

 

Safety Glasses

XP-100 - Orr Safety Black Frame with Clear Lens Safety Glasses.

The XP 100 Safety Glasses are crafted from high-grade nylon material. An ultra light flexible frame, adjustable temples and a comfort fit rubber nosepiece are designed for a perfect fit. Black Frame. Gray Lens. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available with Gray Lens, Indoor/Outdoor Lens or Ice Blue Lens.

Safety Glasses

XP-200 - Orr Safety Black Frame with Clear Lens Safety Glasses.

The XP 200 Safety Glasses are the same as the XP 100, but it's a small frame design for optimum fit. It is crafted from high-grade polycarbonate material. It has an ultra light frame design for comfort, an adjustable temple and a comfort fit rubber nosepiece. Black Frame. Clear Lens. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available with Gray Lens.

Safety Glasses

XP-300 - Orr Safety Black Frame with Clear Lens Safety Glasses.

The XP300 is crafted from high-grade nylon. Its ultra light flexible frame is designed for comfort fit. It sports a soft non-slip rubber temple ends and a comfort fit rubber nosepiece. Black Frame. Clear Lens. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available in Black Frame with Gray Lens, Indoor/Outdoor Revo Lens or Black/orange Frame with Clear Lens or Gray Lens.

Safety Glasses

XP-400 - Orr Safety Black Frame with Clear Lens Safety Glasses.

Our XP 400 Safety Glasses are crafted from high-grade polycarbonate material. They have an ultra light frame design for comfort fit. The XP 400 also come with vertical ratchet and telescoping temple adjustments plus have a comfort fit rubber nosepiece. Available with reading magnifiers. Black Frame. Clear Lens. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available with Gray Lens or Indoor/Outdoor Lens.

Safety Glasses

XP-500 - Orr Safety Black Frame with Clear Lens Safety Glasses.

The XP 500 Safety Glasses are crafted from high-grade polycarbonate material. They sport a micro-light flexible frame design, have a comfort fit rubber nosepiece and soft non-slip rubber temple ends. Black Frame. Clear Lens. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available with Gray Lens, Indoor/Outdoor Revo Lens or Expresso Lens.

Safety Glasses

XP-600 - Orr Safety Black Frame with Clear Lens Safety Glasses.

The XP 600 Safety Glasses are crafted from high-grade polycarbonate material. They sport a micro-light frame design, have a comfort fit rubber nosepiece and soft non-slip rubber temple ends. Black Frame. Clear Lens. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available with Gray Lens, Indoor/Outdoor Revo Lens, Blue Revo Lens or Black Frame with Clear Lens or Gray Lens.

Safety Glasses

XP-700 - Orr Safety Black Frame with Clear Antifog Lens Safety Glasses.

Our XP 700 Safety Glasses are equipped with surgical grade closed foam for high particle count conditions. They are crafted from high-grade nylon material. An ultra light flexible frame design and adjustable temples provide a comfortable perfect fit. Anti-fog treated. Black Frame. Clear lens. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available with Gray Antifog Lens or Indoor/Outdoor Revo Lens.

Safety Glasses

XP-727 - Orr Safety Black Frame with Clear Lens Safety Glasses.

Our XP 700 Safety Glasses are equipped with surgical grade closed foam for high particle count conditions. They are crafted from high-grade nylon material. An ultra light flexible frame design and adjustable temples provide a comfortable perfect fit. Anti-fog treated. Black Frame. Clear lens. 99.9% UVA and UVB protection. Meets and exceeds ANSI Z87.1-2003 high impact standards.

Also available with Gray Lens, Indoor/Outdoor Revo Lens or Expresso Lens.

Welding

2001 - FIBRE-METAL Tigerhood Futura Thermoplastic Welding Helmets.

Streamlined shape is designed to satisfy welders' needs. Classic 3-C free floating headgear ensures maximum comfort. Sturdy, durable ratchet headgear. Available with choice of three protective cap mounting devices. Wide vision style (model no. 2090) features 24 square inches of viewing area. Easy-to-use front loading glassholders increase production, reduce downtime. Stocked in black, blue-plus silver and gold coating. Complete with a shade 10 filter plate installed.

Welding

2090 - FIBRE-METAL Tigerhood Futura Wide Vision Thermoplastic Welding Helmet.

Streamlined shape is designed to satisfy welders' needs. Classic 3-C free floating headgear ensures maximum comfort. Sturdy, durable ratchet headgear. Available with choice of three protective cap mounting devices. Wide vision style (model no. 2090) features 24 square inches of viewing area. Easy-to-use front loading glassholders increase production, reduce downtime. Stocked in black, blue-plus silver and gold coating. Complete with a shade 10 filter plate installed.

Welding

2090-MFBK FIBRE-METAL Tigerhood Futura Wide Vision. Metalic Series.

Streamlined shape is designed to satisfy welders' needs. Classic 3-C free floating headgear ensures maximum comfort. Sturdy, durable ratchet headgear. Available with choice of three protective cap mounting devices. Wide vision style (model no. 2090) features 24 square inches of viewing area. Easy-to-use front loading glassholders increase production, reduce downtime. Stocked in black, blue-plus silver and gold coating. Complete with a shade 10 filter plate installed.

Welding

2006-MFBE FIBRE-METAL Tigerhood Futura Lift-Front Glassholder. Metalic Series.

Streamlined shape is designed to satisfy welders' needs. Classic 3-C free floating headgear ensures maximum comfort. Sturdy, durable ratchet headgear. Available with choice of three protective cap mounting devices. Wide vision style (model no. 2090) features 24 square inches of viewing area. Easy-to-use front loading glassholders increase production, reduce downtime. Stocked in black, blue-plus silver and gold coating. Complete with a shade 10 filter plate installed.

Accessories & Cleaning Products

AO555 - AOSafety Slip-on-Plastic Clear Sideshields.

Slip-on-Plastic Slide. Clear. Does not meet ANSI standards. 100 pair per box.

Accessories & Cleaning Products

ORRAD16ST - Orr Brand Lens Cleaning Towelettes, 100 per Dispenser.

Lens cleaning towelettes. Use pure sight fluid for everyday anti-fog & anti-static cleaning needs. Safe for all types of glass, plastic or polycarbonate eyeglasses, safety, goggles, face shields, and computer monitors. Excellent cleaning with no streaking. 5" x 8" individually wrapped towelettes. Contain no silicone. 100 per box.

Accessories & Cleaning Products

AMA22639 - Allsafe Nylon Brackets.

Fits most safety caps without slots. Heavy-duty rubber cord holds bracket in place. Dielectric. NOTE: Meets CSA Z94.3 standards.

Accessories & Cleaning Products

HUT8154L - Allsafe Window Visors, Clear Polycarbonate Visor, 8" x 15" x .040".

Faceshield provides 99.9% UV protection. Additional styles available.